Integrated Power Supply (IPS) systems are necessary to keep the power on all the time in Bangladesh, especially in places where power blackouts or changes in voltage are common. It stores power and sends it when the main source fails. But how well you take care of an IPS battery has a big effect on how well it works and how long it lasts.
If you don’t take good care of the battery, its performance can drop quickly, which can cause it to fail early and need an expensive repair. This guide will detail how to keep your IPS battery in great shape so that it always works when needed.
Proper Installation of the IPS Battery
Installing an IPS battery is the first step in keeping it in good shape. For these, you need –
Right Placement
Ensure the battery is put in place with good airflow. For example, lead-acid batteries emit gases that need to be safely let out so that they don’t explode.
The battery should be put somewhere where the temperature stays steady. Very hot or very cold weather can shorten the battery’s life by a large amount. The temperature should be kept between 68°F and 25°C (20°C to 77°F).
Correct Position
The battery should be put on a stable, flat surface so that it doesn’t move around and damage the parts inside. Make sure all connections are strong and safe. It’s possible for voltage to drop and inefficient charging or discharging when connections are loose.
Regular Maintenance of the Battery
For your IPS battery to last as long as possible, it must be serviced regularly. Here are some important things to do:
Cleaning
Battery terminals can get corroded over time, which can stop the flow of power. A mixture of baking soda and water should be used to clean the terminals frequently. Before you clean, make sure the battery is off. Also, check the battery case often for signs of damage or leaks.
Water Levels for Batteries
Checking the water level in a lead-acid battery on a daily basis is very important. The water level should be just right, not too low or too high. If you fill it up too much, the electrolyte could leak out and cause rust and other problems.
Battery Testing
A healthy lead acid battery has a power of 12V to 12V when it is fully charged. If the voltage reading stays below this range, it could mean that the battery isn’t keeping a charge well.
So, if you want to buy an IPS system, you need to know the IPS battery price in BD so you can make an informed choice. Prices can be very different depending on the battery’s type and size.
Optimal Practices for Charging Batteries
How you charge your IPS battery has a big impact on how long it lasts. Here are some tips to make sure you charge properly:
Use Right Charger
Always use a charger that the battery maker suggests. When you use a charger that isn’t meant for your battery, it can either overcharge or undercharge, which can damage the battery. Also, you can use a smart charger that changes the charging current and power automatically based on the condition of the battery.
Avoid Overcharging
Keep an eye on the charging time. One of the main reasons batteries fail is that they are overcharged. Make sure you don’t leave the battery to charge for too long. Even though most IPS systems have built-in safety against overcharging, it’s still a good idea to keep an eye on charging cycles.
Regular Use
Regularly deep-discharging lead-acid batteries is not a good idea. Try to keep the battery charged more than half of the time. Deep drains lower the number of times the battery can be charged and discharged.
Best Practice for Battery Usage
Aside from regular upkeep and keeping the battery in a good environment, how you use your IPS battery also affects how long it lasts.
Avoid Overloading
The linked load doesn’t go over what the IPS system can handle. Overloading the battery can damage it and shorten its life. Use products that use less energy, and think about spreading out your use to avoid sudden high loads.
Regular Use
Batteries work better when they are used often. Even if you don’t have frequent power blackouts, you might want to drain and charge the battery every so often to keep it in good shape.
Final Words
Taking care of an IPS battery takes consistent care and attention to detail. By following the tips above, you can make sure that your battery works well and gives you extra power when you need it most. These steps will not only make your battery last longer, but they will also make your power source system more reliable overall.